Prepping

How Much Would It Cost to Dig My Own Well?

If you want to be truly self-sufficient living in a location that is far away from civilization, you will need a well. The process of digging a well is simple enough, but far from easy, and typical residential wells often delve deep into the earth, anywhere from 100 to 200 feet down.

This will usually require the efforts of a specialized drilling rig carried by a heavy truck along with a team I’m specially trained and experienced workman to accomplish. Unfortunately, wells are quite expensive to excavate and install, regularly running north of $10,000 in the United States.

The necessity of wells in conjunction with their expense has led some preppers to look into a DIY solution for installing a functional, modern well. How much can you expect to save over a professional installation if you do it yourself, or alternatively what will the total cost be for a DIY well installation?

Depending upon the depth, complexity and type of well, you can expect to spend anywhere between $2,500 and $6,000 when excavating and installing their own residential well. Mishaps, hard soil and specialized installations will cost more, and installing the well on soil that is very suitable for drilling will cost less. The final number will also vary depending upon a how deep the well must go, with shallow wells costing drastically less than deep ones.

This article can help you zero in on the bottom line figure by helping you assess all the variables that are inherent to excavating and installing a functional, safe residential well. Have a glance at the following sections and compare the factors discussed to your own proposed dig and pretty soon you will have a much better idea of how much you can expect to spend.

Dig Costs and Considerations

Having a professional well installation team dig your well hole, or more accurately drill it, can run you anywhere from $25 to north of $65 per foot of depth achieved.

As mentioned above, most residential wells must reach a depth of 100 to 200 feet, so multiply that number by the average cost of professional drilling and you can expect to spend several thousands just for excavation!

That isn’t even including the well installation, setup and testing! No wonder so many peppers are keen to try their hand at a DIY well installation.

Assuming you can rent the appropriate drilling rig and other hardware, and you know how to operate it successfully and safely, you can get your excavation costs down around $15 to $30 per foot of depth.

Again, this is for a typical residential deep well. The final number could be anywhere from $1,500 to $6,000 just for excavation. This could still be quite a pop, but far nicer than paying professionals to do the same thing for you.

The major variable in the cost of drilling is the depth, but also the type of the soil. Soil that is relatively soft and free of major obstructions like rocks is much easier and quicker to excavate, saving you money.

If you aren’t drilling too far down, and are fortunate enough to be installing your well and soft soil, you will be facing a pretty light bill.

On the other hand, if you have to dig deeply and go through dense clay, rocky layers or soil that is strewn with smaller stone deposits it is going to be slow, laborious and expensive.

The only way to figure out what type you are dealing with is to consult an existing geological survey for your property or have one performed if one does not exist. This is another expense you must account for, and pricing varies wildly depending upon your locale and the type of professional that must conduct the survey.

Generally speaking, once you determine the median price for drilling to a typical depth in your area, you can adjust the price depending upon the soil quality forecast.

Soil that is easy to excavate could save you 25% off your initial estimate. Soil that is extremely difficult to excavate could result in a 200% increase!

Component Costs

Drilling is only one part of the equation when it comes to installing a working well. The well must be finished with a variety of components, sealed and then tested.

The most important part of a working well besides the well hole itself is the well casing, the solid inner liner by which water will be brought to the surface. This both reinforces the well hole, and helps prevent contamination from reaching your water source.

In ages past, the well casing would be made from stone, brick or even wood but today we rely on PVC and steel as a rule.

It sure is nice being able to insert a well casing as easy-to-assemble, modular components, but these modern materials sure can be expensive, even if they save a ton of time and labor.

The cost of the well casing will vary mainly depending upon its length, diameter and material.

As you might expect, steel is more expensive than PVC, with larger steel well casings measuring 8 inches in diameter costing about $75 a foot for deep well. PVC piping is far less expensive, with typical 4 inch PVC casing only costing about $35 a foot.

That is a major difference, and considering the quality of modern PVC piping, you should not spend more unless you really need it for a specialized application!

Aside from the casing, you’ll need a well pump. Well pumps are different depending on whether you have a shallow or deep well, and as you might expect the models designed for shallow wells are less expensive, running anywhere between $200 and $900.

Deep well pumps are designed to be fully submerged in the water source far below, and will cost anywhere from $500 to a little over $2,000.

Most homes making use of a deep residential well will require a pressure tank running anywhere from $300 to $500.

Lastly, various components needed to finish, wire hook up and seal the well will add to the cost. Wires and a wiring harness or actually a highly variable expense, costing $50 to $1,000.

The remainder of the components needed to get you a while working correctly and safely, things like seals, switches and so forth will add another $150 to $200 to your final bill.

A Word on Shallow Wells

If you are planning on installing a shallow well on your property you might be able to go with a specialized well installation like a sand point well. These simple wells can be easily installed by a single individual in as little as one day, and you need only a sledgehammer or other capable pounding tool to accomplish this.

A sand point well kit, completely installed and hooked up, might cost as little as $2,000. They aren’t suitable for every application since they can only be installed in a softest of soils and for shallow well applications in addition to being more susceptible to contamination.

But if that sounds like just the ticket you could save a ton of coin!

Conclusion

A DIY deep well installation will run a person anywhere between $2,500 and $6,000 depending on the required equipment, necessary components and any mishaps or misadventure that befalls the excavation and installation of the well.

If you have just a little bit of ingenuity and experience with this type of operation installing your own well could save you a small fortune compared to having professionals drill and install for you.

Source

You may also like

More in:Prepping

Comments are closed.